Step 1: Attach the Mechanism to Seat Cushion
Using the Mechanism Screws (C) attach the metal mechanism to the bottom of the seat cushion. Make sure your seat cushion and mechanism are oriented correctly before screwing into place. We recommend using your cardboard box as the base of your workstation.
Step 2: Attach Armrests and Seat Back
Using the Armrest Screws (B), attach armrests to seat cushion. Orient the armrests so that the armrest "R" (see bottom of armrest) ends up on the right side of the chair when upright, and armrest "L" (see bottom) ends up on the left side.
Using Backrest Screws (A), attach seat back to the mechanism. Note that this is most easily accessible if you are using your cardboard box as a workstation.
Step 3: Attach Multi-Surface Casters to Base
Slide the multi-surface casters into the base. You should feel them click into place. Next, slide the Pneumatic Cylinder firmly into the base.
Step 4: Place Seat onto Cylinder
Place the seat cushion, mechanism, and back, onto the cylinder. Once you have completed this, apply pressure to the top of your seat with your hands or by sitting in the chair. Note: Once you have locked your cylinder into place, it cannot be removed.